0102
Installation method of stainless steel eccentric reducer
2023-12-29 10:37:28
1. Flat roof installation/pipe top flat connection
The ladder-shaped side of the stainless steel eccentric reducer is installed downward. This installation method is generally used for the stainless steel eccentric reducer at the pump inlet. When the water pump absorbs water, the liquid will be vaporized due to temperature influence, and the bubbles will float. If it is not installed flat, the bubbles will accumulate in the ladder shape of the stainless steel eccentric reducer to form air bags, which will cause damage to the water pump later. The inlet of the pump is generally installed with a stainless steel eccentric reducer with a flat top to prevent cavitation.
The ladder-shaped side of the stainless steel eccentric reducer is installed upward. This installation method is used for the installation of the regulating valve and is conducive to drainage.Some impurities or accumulated liquid will sink to the top of the pipe. If a flat-top installation is used, the impurities will accumulate on the ladder surface and cannot be discharged.Install the stainless steel eccentric reducer with a flat bottom to prevent accumulation that cannot be discharged.
When installing stainless steel eccentric reducers, you need to pay attention to the following issues:
1. Select appropriate specifications and parameters, and select appropriate stainless steel eccentric reducers according to the actual conditions of the pipeline to ensure the connection quality and safety of the pipeline.
2. When installing, pay attention to the direction and position of the stainless steel eccentric reducer. The pipe mouth should be facing up or down according to actual needs.
3. It is necessary to pay attention to the limitations of eccentric distance and eccentric angle during installation to ensure the connection quality and safety of the pipeline.
4. Before installation, the stainless steel eccentric reducer should be inspected to ensure that its quality meets the requirements and is not damaged or deformed.